Pela is pleased to finally offer a heavy duty unit for big engines. With a 14 liter capacity, the PELA Pro 14 is the largest on the market. For durability, the pump unit is also housed inside the container.
Ideal in the workshop for servicing large engines or several smaller ones before emptying. Ideal for boats with large diesels and those with twin engines.
|Manufacturer||Pela Oil Changers|
|Manufacture Part Number||PL-14K|
Write Your Own Review
How to Use
1. Warm up the oil by running the engine. This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick.
Note: If you can't hole the sipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit.
2. Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube.
3. Pump the handle 4-15 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.
4. After the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump as in the photo and pour gently. Do not hold it upside down! Bring the used oil to a recycling depot.
Note: No special cleaning is required on the unit. Just empty as much oil as possible (do not store oil long term).