|SKU||Paint Color||Retail Price||Our Price||Savings|
|ILX-YBA063A||Black||$45.57||$26.43||You Save 42%|
|ILX-YBA064A||Gray||$55.94||$31.33||You Save 44%|
|ILX-YBA068A||White||$55.94||$31.33||You Save 44%|
Interlux Trilux Boat Prop & Drive Antifouling Spray Paint
Trilux Prop and Drive Aerosol is the highest performance aerosol antifouling available. It has been formulated specifically for aluminum outboards, outdrives and can be used on all underwater metals. Trilux utilizes Interlux's Biolux technology. Biolux technology is a unique system consisting of organic boosting biocides that are incorporated in a high effective controlled release film to deter slime. Prime bare metal with Primocon.
- New formulation provides effective antifouling in a convenient aerosol
- Biolux technology reduces slime and increases antifouling performance
- For all outdrive and underwater metal
- Sold in 12 oz. aerosol can
- Black (ILX-YBA063A
- Gray (ILX-YBA064A)
- White (ILX-YBA068A)
- Finish: Matte
- Coverage (approx): 21.2 ft²/gal
- Number of Coats: 2
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
|Manufacture Part Number||YBA063A, YBA064A, YBA068A|
|UPC||081948001038, 081948000468, 081948001045|
|ASIN||B003E21MRG, B0053HR0T4, B003E1Y31O|
APPLICATION DATA METHOD: Aerosol can
NUMBER OF COATS: 2 Use an entire can of Trilux Prop & Drive Aerosol per lower unit.
DRY FILM THICKNESS PER COAT: 2 mils
COVERAGE: 1 aerosol can will cover 1 lower unit (2 coats)
APPLICATION TEMP: 50°F Min. / 95°F Max.
|Temp||To Touch||To Recoat||To Launch|
|95°F||1/2 HR||4 HR||8 HR|
|73°F||1/2 HR||6 HR||12 HR|
|50°F||1/2 HR||12 HR||16 HR|
PREVIOUSLY PAINTED SURFACES: with Trilux Prop & Drive Aerosol Sand with 80 grade (grit) paper. with Factory Finish or Antifouling Paint Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Re-sand any areas where bare aluminum is exposed with medium grade (grit) emery cloth and wipe clean. Follow procedure for bare aluminum above.
BARE ALUMINUM: For Black, White and Gray - Sand with medium grade (grit) emery cloth to a bright metal finish. Immediately apply VinyLux Primewash 353/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours. Apply 1 full can of Primocon Aerosol Primer YPA985 in a multi-layer procedure. For Clear - Sand with medium grade (grit) emery cloth. Prime and reapply factory finish before applying Trilux Prop & Drive Aerosol.
APPLICATION INFORMATION: At least 2 coats should be applied. Hold can 12-16 inches from the unit when applying the paint. Wait for minimum over-coating time between coats. Continue until the entire can has been used per outdrive. Be sure the paint is completely dry before immersion and allow minimum immersion time. Shake can well, listen for mixing ball & continue shaking vigorously for at least 2 minutes. It is best to shake in an up and down motion. IF CAN IS NOT SHAKEN PROPERLY CLOGGING OF THE TIP MAY RESULT. Trilux Prop & Drive Aerosol Clear is recommended for light colored outdrives such as Volvo, Yamaha and Evinrude. It may appear hazy over Mercury (black) or any dark colored outdrives. For Mercury outdrives use Trilux Prop & Drive Aerosol Black 5493A. Put extra coats of Trilux Prop & Drive Aerosol on the props and other running gear. For best antifouling protection use entire can of primer and Trilux Prop & Drive Aerosol for each lower unit.