CE Smith Roller Style Boat Trailer Guide-On

CE Smith Roller Style Boat Trailer Guide-On

Makes boat loading easier with the CE Smith Roller-Style Trailer Guide-On. These smooth rolling guides assist in centering the boat onto the trailer. This style of guide-on is ideal for retrieving your boat on shallow ramps where the trailer is not far into the water or when you are trying to retrieve your boat alone. The uprights with rollers come fully assembled and ready for installation.

Features:

• 1-1/2" Pre-galvanized steel uprights lean outward 15° to cradle the boat
• Guide-ons are 21" tall above the frame with 9" roller & 2" roller caps at top & bottom
• Mounting hardware included for frames up to 3" W x 4-1/4"H
• Mounting brackets allow up to 13" of adjustment out from each side of the frame
• Comes with both sides of the trailer

For larger trailer frames, you will need the Large Frame U-Bolt Kit (part number 11416). Click Here.

Roller Style Guide-On Installation Instructions

• Place u-bolts as shown below for either 2" wide or 3" wide frame
• Use 1 flat u-bolt and 1 formed u-bolt with washers and nuts to loosely attach each u-shaped bracket under or on top of trailer frame at desired locations.
• Insert a guide-on upright post into each of the u-brackets to the desired width. Do not fully tighten bolts.
• Make sure the upright posts are seated level in the u-brackets before completely tightening the u-bolts. Finish tightening the u-bolt connections.
• Insert a black plastic cap on top of each upright post. 

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov