Interlux Paint
Out of stock
Total Price:
Interlux Flattening Agent for Two Part Polyurethanes
Interlux Flattening Agent is a flattening agent used to reduce the gloss of Perfection, Interspray 900, Interspray 800 and Interthane Plus when applied to decks, spars, masts and on surfaces where a less than high gloss finish is desired.
Finish: Matte
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
HOW TO APPLY FLATTENING AGENT FOR TWO PART MARINE POLYURETHANES
APPLICATION METHOD: Conventional Spray
It is recommended that reduced gloss level products are sprayed to ensure a uniform finish
THINNER: Spray – Reducing Solvent 2316N | Brush/Roller – Brush Thinner 2333N
Check viscosity of the matted product and then follow thinning guidelines for the product in which the Flattening Agent for Two Part Polyurethanes has been added.
PREPARATION PROCEDURES:
MIXING:
Perfection and Perfection Plus:
Note: Test applications are recommended before proceeding. The actual levels of Flattening Agent for Two Part Polyurethanes required may vary somewhat from color to color.
APPLICATION:
Conventional Spray Specifications
**Flattening Agent for Two Part Polyurethanes will provide a reduced mar-resistant finish and should not be used on walkways.
Information sourced from the Interlux Flattening Agent for Two Part Polyurethanes Finishes Application Guide.
How to Apply
MSDS
California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
Other Details
Oops, something went wrong. Please try again.
You are now logged in!