Mercury 35-8M0162829 FourStroke Outboard Oil Filter

Mercury 35-8M0162829 FourStroke Outboard Oil Filter

This High quality OEM oil filter works with Mercury FourStroke Outboard Oil to provide the ultimate protection for your engine. See your engine service and maintenance manual for further details.

It is recommended that you change your fuel filter after every 100 hours of normal use or minimally once per season.

Application Information:

This oil filter is for the following applications: Mercury/Mariner 25 HP FourStroke (Carb MY2006 & prior), 30 HP FourStroke (3 cyl. MY2005 & prior), all 40-60 HP FourStroke outboards (MY1998 & newer) and all 75-115 HP FourStroke outboards (USA 1B366822 & prior, 2B094996 & newer).

• s/s part 35-8M0065104
• Replaces Part # 35-822626K04

Interchangeable with:

• Sierra
• 18-7914

Mercury Oil Filter Installation Instructions

1. Unscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base
2. Apply a thin coat of oil to filter gasket. Make sure the gasket is seated properly in base of the filter
3. Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn
4. Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn
5. Refill crank case and run the engine while checking for leaks
6. Check oil level

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov