Categories

Site Information

 Loading... Please wait...
Need Help? Call Toll Free: 877-388-2628
  • Same Day Shipping
  • Free Shipping
  • Low Price Guarantee
  • Attwood Folding All-Round Anti-Glare Light
  • Image 2

Attwood Folding All-Round Anti-Glare Light

SKU:
ATT-5358-P12-7
Availability:
Order within and your order ships today! Details
Current Stock:
3
$37.34
Our Price: $29.50
(You save $7.84)
Quantity:
Frequently Bought Together

    Product Description

    Attwood Folding All-Round Anti-Glare Light

    The Attwood Folding All-Round Anti-Glare Light features a fold-down base that allows the light to swing 180°. Has two mile, 360° visibility and is for use up to 39.4 ft. This light comes with a 12" black plastic pole, which can be mounted on both horizontal and vertical mounts. The anti-glare lights include a 9-watt wedge base lamp. All wiring is concealed and protected within the pivoting base. 

    In extreme conditions, if a 12ft./lb. force hits the base, the cam lock releases and allows base to swing down, reducing the chance of breakage to the base or pole. 

    Materials are non-corrosive; bases are glass-filled polymer. Mounts included.  

    Installation Instructions

    HOW TO INSTALL ATTWOOD FOLDING ALL-ROUND ANTI-GLARE LIGHT

    Installation

    • Choose a position near the transom that is accessible to wiring and has clearance below deck.
    • Place base on the gunwale or deck. At desired location, be sure there I room to rotate the cover. Mark position for the 1-3/8” socket hole.
    • Remove base and drill the 1-3/8” diameter socket hole, being careful not to crack the gel coat finish around the hole.
    • Fit base into socket hole so it is parallel to boat centerline. Mark position and drill the three screw holes.
    • Remove base and connect wires through socket hole. Connect one wire to the battery ground (-). Attach other wire to the 1-amp fused, positive (+) switched wire from the navigation light switch.
    • Apply sealant between deck and light base. Fasten base with three #10 stainless steel screws. Do not overtighten screws.

    Replacing Light Poles without a Locking Collar

    • Align pole screw with slot in the existing base. Insert pole into base.
    • Press down firmly to engage electrical connectors.
    • To remove pole, pull straight up.

    Replacing Light Poles with Locking Collar

    • Align pole screw with slot in the base. Insert pole into base.
    • Press down firmly to engage electrical connectors.
    • Slide locking collar down to base, rotate until you can insert lower ring inside top of base.
    • Press collar down into base and rotate until it tightens between pole and base.
    • To remove light, rotate locking collar in opposite direction until it loosens, then pull up on pole.

    Removing Locking Collar

    • For bases that do not accept locking collar, remove screw at bottom of pole. Slide locking collar off end of pole.
    • Replace screw in the upper screw hole.

    Replacing Bulb

    • Unscrew frosted globe counter-clockwise and remove.
    • Pull bulb straight up. Replace with #906 9-Watt Wedge Base Replacement Bulb.
    • Screw lens clockwise onto pole.

    Clean the light with a mild soap and warm water solution. Never use solvents or abrasives that may damage the lens or housing of the light. 

    California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov.

    Product Reviews

    Product Questions & Answers

    Other Details

    Google Product Type:
    Lights
    Wiser:
    Yes
    Product MPN:
    5358-P12-7
    Product UPC:
    022697535078
    Condition:
    NEW

    Find Similar Products by Category

    Related Products

    • Same Day Shipping
    • Free Shipping
    • Low Price Guarantee