Total Price:Add to Cart
Quicksilver Corrosion Guard is a rust inhibitor that forms a water resistant barrier on non-painted and painted surfaces. Use to prevent rust from forming on outdrives, lower units, and power trim motors and components or other metal surfaces. Can also be used to prevent further paint damage in areas where undercutting and blistering have occurred.
Do not spray on surfaces coated with antifouling or biocide paint. Do not spray on drive belts.
Use when air and can temperature is between 50°F and 80°F and humidity is 60% or less. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist.
When finished spraying, clear spray valve by turning can upside down and pushing spray button until clear gas comes out. Clean up wet paint with mineral spirits. Dispose of empty can in accordance with local, state, and federal regulations.
California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov
Interlux Trilux Boat Prop & Drive Antifouling Spray Paint Formulated specifically for aluminum outboards and outdrives, Interlux’ Trilux Prop and Drive Antifouling Paint is a...Choose Options