Engine_Fuel & Props

Bennett Trim Tab Cylinder - A1101A Replacement Every boater, especially those with speed or sport boats, should be aware of the value and benefits to installing and maintaining boat trim tabs on their craft. Maximizing its engine output, these tabs...

Add to Cart

Perko Chrome Bronze Replacement Gas Cap with Chain Chrome plated bronze spare gas cap with stainless steel bead chain for vented or non-vented, angled or straight. For use with Perko 0540 & 0541.

Add to Cart

Integral tank vent with flame arrestor. No deck plate key or ground wire required. Black plastic with flip top cap. 2-7/16" neck length, 1-1/2" for fuel hose, 5/8" for vent hose.

Add to Cart

Bennett Trim Plane Assemblies Bennett trim planes are made of high quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of...

Choose Options

Perko Chrome 3" Cowl Vent with Black Plastic Base 3" chrome zinc cowl vent with black plastic base. Uses 3" vent hose. Dimensions: 2 5/8"H x 4 3/8"W x 5 3/4"L.

Add to Cart

Chrome plated zinc alloy with black plastic splash guard Removable 30 mesh stainless steel wire screen flame arrestor Hose size 5/8" Maximum hull thickness 3/4"

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - 35° Angled Neck Th Perko Vented Gas Fill is constructed of durable black polymer and features a 35 degree angled neck. This gas fill has an integral tank vent with an anti-surge valve. Deck plate key not...

Add to Cart

Bennett BOLT Electric Trim Tab Set Bennett Marine has been leading the way in electric trim tabs since 1960 and is trusted by the leading boat builders for over half a century. Founded on the principles of quality and service Bennett electric trim tab...

Choose Options

Deck fill with black plastic splash guard and cap with strap. Features key less, easy to use cap with tabs. Chrome Plated zinc alloy. Requires grounding per u.s.c.g. requirements. For Hose Size: 1-1/2" O.D. Flange: 3-1/8" Length of Neck :...

Add to Cart

Bennett A-1114 Actuator Lower Hinge W/Pin Bennett Actuator lower hinge with stainless steel lower hinge pin. Replacement part for Bennett Actuator.

Add to Cart

Perko Chrome Clam Shell Ventilator Perko clam shell ventilators are ideal for many applications, from covering vent holes for battery boxes, water tanks, and fuel tanks to venting engine compartments. Made of chrome plated brass. Each is pre-drilled for...

Add to Cart

Bennett BRC4000 BOLT Rocker Switch The Bennett BOLT Rocker Switch is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite...

Add to Cart

Bennett V351HPU Trim Tab Hydraulic Power Unit 12 Volt Hydraulic Power Unit Bennett 12V Trim Tab Hydraulic Power Unit. High-quality replacement Power Unit for your trim tab set-up! Super-strong to lower and hold firm even the largest of tabs. Strength...

Add to Cart

Gas Tank Vent with 90 degree swivel elbow. Chrome plated zinc alloy cap with zinc alloy elbow. Black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor. Design allows elbow to be rotated to any position. Hose size 5/8"...

Add to Cart

Black plastic deck plate key for deck plate size 1-1/4" and 1-1/2". The keys for 1" thru 1-1/2" deck plates have a 1 inch spade on handle that allows them to fit many other "slot" type opening deck plates.

Add to Cart

Bennett ES2000 Euro Style Rocker Switch This control is ergonomically designed, water resistant and provides a positive “click” when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at...

Add to Cart

Locking Gas Cap. Black plastic cap with cover for key hole. Includes 2 keys. Fits 1313 and 1399 models. Cap outside thread diameter: 1 15/32 inches

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - Straight Neck The Perko 0541 series of vented fills are built to be durable and long lasting. This fill is marked for gas and features a 2-7/16" straight neck. Perko's 0541 series fills are constructed with a black...

Add to Cart

Bennett Hydraulic Trim Tab Kit w/ Euro-Style Control Bennett Classic Hydraulic Trim Tabs are ideal for boats that stay in the water and require high speed action under extreme marine conditions. These hydraulic trim tabs help your boat get on the plane...

Choose Options

Bennett Complete Sport Hydraulic Trim Tab System Bennett Sport Trim Tabs help your boat get on the plane fast and stay on the plane at intermediate speeds. By staying on the plane longer, your boat will have increased fuel efficiency and speed. If you...

Choose Options