Rotary Steering Cable by Teleflex

Rotary Steering Cable by Teleflex

Rotary Steering Cable by Teleflex
SKU:
TEL-SSC6106.1
$135.69
$117.99
$17.70
Availability:
In Stock - Ships Today
Ships next business day if ordered in the next:

Frequently Bought Together

  • Choose Options

Teleflex Rotary Steering Cable

Teleflex QC II Replacement Steering Cable Assemblies are a direct Replacement for Teleflex SSC62 (used in Safe-T QC & NFB Systems) and SSC72 (used in Safe-T TS & Big-T Systems) and fit most Teleflex rotary helms made after 1968. The QC II features the patented Quick Connect cable hook-ups. These cables can be used on boats with inboards, outboards & stern drives, with single or twin motors.

Features:

  • Fast, easy installation: uses simple snap-in connection, Teleflex Quick Connect (QC) cable and industry standard Safe-T mounting hardware
  • This kit comes with the SA27620P Helm Converter to covert the Quick Connect to a Threaded Connection.

-----------------------------------------------------------------------------------------------------------------------------

How to Measure Steering Cables “Measure Twice. Order Once.”

Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows:

steering-cable-measuring.jpg

For Rotary Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket (“Y” dimension, shown in above drawing) in inches, add 18″, and round up to next foot. Order that length cable.

New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at centered tiller.

For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6″, then round up to the next foot. Order that length cable.

For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6″ and round up to the next foot. Order that length cable.

TYPICAL SINGLE STATION ROUTING

cableimage1.jpg

A single-cable, starboard drive push-pull mechanical cable system is shown in this diagram. If your mechanical system is different than the one depicted and/or you have any questions about mechanical steering after reviewing this guide, please contact Teleflex (Mechanical) Technical Service at (610)-495-7011 or www.teleflexmarine.com

Cable routings (such as those found on pontoon boats) may vary from this drawing. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.

cableimage2.jpg

California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov

Other Details

Google Product Type:
Steering
Wiser:
Yes
Steering Type:
Rotary
fbt:
related products

Product Reviews

Questions & Answers