Hatch Lifts from Wholesale Marine are top of the line.
Hatch Lifts from Wholesale Marine are designed to meet the specific needs of the marine industry. They are made entirely of non-corrosive materials and are completely submersible. Ensuring that they will look and perform like new for many years of trouble free boating. Our inline motor design makes mounting easier and delivers over 750 lbs. of lift. Our clutchless ballscrew design always runs in sync on dual lift applications and never binds.
The function of our hatch lift systems are simple. Since the hatch lift is based around a ballscrew it is able to push or pull a heavy load and remain at a constant position. To raise a load, extend the hatch lift by pressing on the upper part of the switch. To lower a load, retract the hatch lift by pressing the lower part of the switch.
Our hatch lifts are easy to install because they install with a single power cable. They draw an average of five amps of power and deliver over 500 pounds of push for heavy engine covers, decks, large hatches and electric consoles.
In case of power failure, hatch lifts from Wholesale Marine are supplied with two clevis pins at the mounting brackets. To pull this pin out while the hatch is closed you must rig it to a point outside of the hatch.