Engine_Fuel & Props

Attwood Water-Resistant Turbo In-Line Bilge Blower The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power...

Choose Options

Perko Chrome Bronze Replacement Gas Cap with Chain Chrome plated bronze spare gas cap with stainless steel bead chain for vented or non-vented, angled or straight. For use with Perko 0540 & 0541.

Add to Cart

Attwood Marine Replacement Cover for P-Trap Vents Available in Black or White.

Choose Options

Integral tank vent with flame arrestor. No deck plate key or ground wire required. Black plastic with flip top cap. 2-7/16" neck length, 1-1/2" for fuel hose, 5/8" for vent hose.

Add to Cart

Perko Chrome 3" Cowl Vent with Black Plastic Base 3" chrome zinc cowl vent with black plastic base. Uses 3" vent hose. Dimensions: 2 5/8"H x 4 3/8"W x 5 3/4"L.

Add to Cart

Chrome plated zinc alloy with black plastic splash guard Removable 30 mesh stainless steel wire screen flame arrestor Hose size 5/8" Maximum hull thickness 3/4"

Add to Cart

Replacement Cap for gas, diesel and water hose deck fills. For 1-1/4" straight pipe threads. Highly polished finish. Flush cap is slotted for separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel beaded...

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - 35° Angled Neck Th Perko Vented Gas Fill is constructed of durable black polymer and features a 35 degree angled neck. This gas fill has an integral tank vent with an anti-surge valve. Deck plate key not...

Add to Cart

Attwood Louvered Marine Plastic Venturi Vent Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

Add to Cart

Deck fill with black plastic splash guard and cap with strap. Features key less, easy to use cap with tabs. Chrome Plated zinc alloy. Requires grounding per u.s.c.g. requirements. For Hose Size: 1-1/2" O.D. Flange: 3-1/8" Length of Neck :...

Add to Cart

Perko Chrome Clam Shell Ventilator Perko clam shell ventilators are ideal for many applications, from covering vent holes for battery boxes, water tanks, and fuel tanks to venting engine compartments. Made of chrome plated brass. Each is pre-drilled for...

Add to Cart

Attwood 6 Gallon Fuel Tank with Gauge Attwood Portable Fuel Tanks are constructed of the same high strength Multi-layer Co-extruded HDPE/EVOH material as found in automotive fuel systems. Attwood portable fuel tanks are certified to EPA and CARB...

Add to Cart

Gas Tank Vent with 90 degree swivel elbow. Chrome plated zinc alloy cap with zinc alloy elbow. Black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor. Design allows elbow to be rotated to any position. Hose size 5/8"...

Add to Cart

Black plastic deck plate key for deck plate size 1-1/4" and 1-1/2". The keys for 1" thru 1-1/2" deck plates have a 1 inch spade on handle that allows them to fit many other "slot" type opening deck plates.

Add to Cart

Attwood Louvered Marine Vent Stainless Steel Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

Add to Cart

Locking Gas Cap. Black plastic cap with cover for key hole. Includes 2 keys. Fits 1313 and 1399 models. Cap outside thread diameter: 1 15/32 inches

Add to Cart

Attwood Marine 90 Degree P-Trap Fuel Tank Vent The 1670/1671/1674 P-traps have been tested and certified by a third party lab to meet the ABYC weathertight and watertight requirements and ensure no liquid water will reach a fuel vent...

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - Straight Neck The Perko 0541 series of vented fills are built to be durable and long lasting. This fill is marked for gas and features a 2-7/16" straight neck. Perko's 0541 series fills are constructed with a black...

Add to Cart

Attwood Marine Fuel Tank Vent - Straight Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations. Hose Size 5/8" ID <

Add to Cart

Retaining Cable For Deck Plates. Stainless steel cable, ring and self tapping screw. Length 7".

Add to Cart