Engine_Fuel & Props

Perko Chrome Bronze Replacement Gas Cap with Chain Chrome plated bronze spare gas cap with stainless steel bead chain for vented or non-vented, angled or straight. For use with Perko 0540 & 0541.

Add to Cart

Integral tank vent with flame arrestor. No deck plate key or ground wire required. Black plastic with flip top cap. 2-7/16" neck length, 1-1/2" for fuel hose, 5/8" for vent hose.

Add to Cart

Perko Chrome 3" Cowl Vent with Black Plastic Base 3" chrome zinc cowl vent with black plastic base. Uses 3" vent hose. Dimensions: 2 5/8"H x 4 3/8"W x 5 3/4"L.

Add to Cart

Chrome plated zinc alloy with black plastic splash guard Removable 30 mesh stainless steel wire screen flame arrestor Hose size 5/8" Maximum hull thickness 3/4"

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - 35° Angled Neck Th Perko Vented Gas Fill is constructed of durable black polymer and features a 35 degree angled neck. This gas fill has an integral tank vent with an anti-surge valve. Deck plate key not...

Add to Cart

Deck fill with black plastic splash guard and cap with strap. Features key less, easy to use cap with tabs. Chrome Plated zinc alloy. Requires grounding per u.s.c.g. requirements. For Hose Size: 1-1/2" O.D. Flange: 3-1/8" Length of Neck :...

Add to Cart

Perko Chrome Clam Shell Ventilator Perko clam shell ventilators are ideal for many applications, from covering vent holes for battery boxes, water tanks, and fuel tanks to venting engine compartments. Made of chrome plated brass. Each is pre-drilled for...

Add to Cart

Gas Tank Vent with 90 degree swivel elbow. Chrome plated zinc alloy cap with zinc alloy elbow. Black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor. Design allows elbow to be rotated to any position. Hose size 5/8"...

Add to Cart

Bob's Machine Transom to Jack Plate Bolt Kit The Bob's Machine Transom to Jack Plate Bolt Kit is used for jack plate installation. This kit is for motors with a standard BIA bolt pattern only, and cannot be used with the Bob's Machine Mini Manual Jack...

Choose Options

Black plastic deck plate key for deck plate size 1-1/4" and 1-1/2". The keys for 1" thru 1-1/2" deck plates have a 1 inch spade on handle that allows them to fit many other "slot" type opening deck plates.

Add to Cart

Locking Gas Cap. Black plastic cap with cover for key hole. Includes 2 keys. Fits 1313 and 1399 models. Cap outside thread diameter: 1 15/32 inches

Add to Cart

Perko Vented Gas Fill for 1.5" Hose - Straight Neck The Perko 0541 series of vented fills are built to be durable and long lasting. This fill is marked for gas and features a 2-7/16" straight neck. Perko's 0541 series fills are constructed with a black...

Add to Cart

Bob's Machine Action Series Hydraulic Jack Plate Bob's Machine Action Series Hydraulic Jack Plates are built to be powerful, durable, and versatile. The Action Series jack plates are the first jack plates to offer a pump inside the jack plate structure,...

Choose Options

Retaining Cable For Deck Plates. Stainless steel cable, ring and self tapping screw. Length 7".

Add to Cart

Bob's Machine ISO 32 Hydraulic Jack Plate Oil Bob's Machine Lucas ISO 32 weight hydraulic fluid is developed specifically for Bob's Machine jack plate pumps. A completely empty system with standard hoses will use about 1.5 qts. ISO 32 AW Hydraulic...

Add to Cart

Perko White/Chrome Gas Tank Vent 5/8" Hose Barb Removable Cap

Add to Cart

Bob's Machine Jack Plate Steering Wheel Switch Keep your hands on the wheel with the Bob's Machine Steering Wheel Switch for jack plates and tilt & trims. This switch is used like a blinker switch in a car to allow you to safely control your jack...

Choose Options

Stainless Steel Locker Ventilator. O.D. Size 2 1/2" Uses #6 Screws

Add to Cart

Bob's Machine Jack Plate to Motor Bolt Kit The Bob's Machine Jack Plate to Motor Bolt Kit is for use with jack plate installation. This kit is for motors with a standard BIA bolt pattern only and is not for use with the Bob's Machine Mini Manual Jack...

Add to Cart

Perko Fuel Fill Locking Insert Perko fuel system locking insert for use with 1-1/2" vented fills. This locking insert fits most Perko vented fills and features a polymer body with zinc alloy lock cylinder. A dual purpose key opens the fill cap and...

Add to Cart