Aquagard 180 Wash & Dewaxer - Quart

Pettit Bottom Prep Fiberglass Dewaxer Fiberglass Dewaxer is a special blend of solvents, formulated to cut through and remove mold release, grease, and previously applied waxes from the gelcoat. Can...

Pettit Easypoxy (EZ-Poxy) High Gloss Topside Marine Paint Pettit Easypoxy is a modern Polyurethane Paint that is easy to apply. One part application, long lasting, and provides fantastic gloss...

Pettit 120 Brushing Thinner Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will...

Interlux Fiberglass Solvent Boat Wash and Wax Remover 202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being...

Pettit EZ Prime High Build Topside Undercoater Pettit EZ Prime is a high-build formula that dries quickly and is easy to sand. This undercoater should be used as a base coat whenever the surface...

Aquagard Water-Based Antifouling Paint Aquagard Water-Based Antifouling Paint is a polyvinyl/acrylic copolymer, cuprous oxide pigmented coating forumulated especially to prevent barnacles, algae,...

Pettit Protect Gray High Build Epoxy Barrier Primer Coat Pettit Protect High Build Epoxy Primer is a heavy duty, two component epoxy coating for use where maximum resistance to fresh or salt water...

Pettit Bio-Blue Marine Hull Surface Prep Bio-Blue Hull Surface Prep is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting...

Interlux Interprotect Epoxy Barrier Coat Kit - Gray Interprotect 2000E is a unique two part epoxy coating, developed to protect new and used fiberglass hulls from water absorption. Microplates...