How to Install Shakespeare Antenna

IMPORTANT! Please read all instructions before installing. The Style 5120 is a Centennial Series, AM-FM antenna of 8ft overall length with a chrome plated brass ferrule and 15ft cable with Motorola type plug attached.

Tools required: None

Installation Instructions

Choose a mounting location that is as high as possible, as free as possible from obstructions, and as far as possible from other antennas.

1. Mount the antenna using a Shakespeare Style 4187 Ratchet Mount (sold separately). Follow the directions included with the mount you choose.

2. Do not cut the cable. Route the cable to your AM/FM receiver and plug the Motorola type plug into the antenna jack. Coil any excess cable in an out-of-the-way place. The cable can be lengthened with a Style 4352 AM-FM 10ft extension cable kit (sold separately).

Cleaning instructions

To clean the antenna, use mild dishwashing liquid (one that is not harsh to the hands and without ammonia) in lukewarm water.

Tech Tip: This antenna will read open circuit when tested with an ohm meter or continuity tester.

The information provided here has been reproduced courtesy of Shakespear. Wholesale Marine reproduced this information 08/05/2009