Painting your Boat DIY Series - Prevention and Repair of Boat Gelcoat - Interlux InterProtect As A Multi-Use PrimerThe Interlux InterProtect products were introduced in 1985 for the repair and prevention of gelcoat blisters and quickly became the product of choice for professionals and do-it yourselfers alike. In the ensuing years it has become the standard by which everything else is measured. A study undertaken in 2001 reported that boats with InterProtect System on the bottom had a higher resale value than boats that did not.Interlux InterProtect has proven itself to be a universal primer. Below the waterline it can be used for corrosion protection on all underwater metals for hulls keels, trim tabs and running gear as well as for blister protection and as part of the Ultimate No Sand System for new fiberglass boats. Above the waterline InterProtect is used on fiberglass and all metals.The Interlux InterProtect System was designed to repair hulls which have experienced gelcoat blistering. However, the best time to attack hull blistering is before it happens. Taking preventative action before a problem occurs greatly reduces the likelihood of an expensive repair and has been shown to increase resale value of your boat. If you're buying a new boat, protect your investment with the InterProtect System before it ever goes into the water!Click here to buy Interlux Interprotect 2000E #DIY #Maintenance #Paint